Labino - Leakage
Leak detection with high intensity UV-light (black light)
UV, combined with fluorescent tracers, can be used in a closed, fluid or gas based system to detect cracks
and leaks in for example pipes, valves and filters. Fluorescent tracers are usually highly concentrated and
in combination with high intensity UV-light (black light), only minor quantities are required.
Leak detection in water heating plants and refrigeration systems
Preparing primary heat or primary cooling mediums with a fluorescent tracers makes it easy to detect even very
small leakages as the leaking spot illuminates when exposed to high intensity UV-light (black light). The method
also enables the user to easily decide which part is responsible for the leakage, the supplier (primary side) or
the customer (secondary side).
Density control of filter systems
When general filter leakage is detected in solid-fuel power plants, the Labino high intensity UV-light (black light)
can be used to decide the exact location of the leakage. If the primary (contaminated) air is prepared with fluorescent
pigments or fluorescent tracers, the leakage will appear as a luminous beam on the secondary (filtered) side. Using this
method enables the inspector to change or repair the specific leaking part of the complete filter.
What makes the Labino® UV-Spotlight unbeatable?
1. The long range and power of the UV-Spotlight. No more need to climb ladders or darkening the inspection area.
2. The portable, battery operated TrAc series are easy to carry around for on-site inspections. No need for mains
power.
3. The high UV intensity creates new possibilities for leak detection, such as inspection in normally lit areas, or even
outdoors in daylight with maintained contrast-to-background and maximized probability of detection. Quality and
safety is improved, time of inspection is reduced.
4. Immediate start and restart ¨C full power in approx-imately 5-15 seconds. Time saving.
5. Low heat generation and energy consumption (35 W output power). No need for cooling fans. Creates a pleasant
work environment and reduces energy costs.
6. Dust tight and temporary water jetting proof. Can be used in rough conditions, even outdoors (IP65 classified).
7. CE-marked ¨C according to electromagnetic compatibility and the low voltage directive. Safe.
8. ETL/cETL approved ¨C by Edison Testing Laboratories, according to UL and CSA standards. Safe.
9. Semko approved. Safe.
10. Comprehensive product range, including different mains, voltages and portable, battery operated units with a choice
of handles. Flexible.
Download Application Information